Parallel Deck Vibrating Screen

GN Parallel Deck Vibrating Screen is composed of upper and lower layers in parallel. Generally, the cut point of the upper screen and lower screen are the same. The upper and lower screens are feed separately. After screening and filtration, the liquid separately flow into the collecting box. GN parallel deck vibrating screen is used for wet separation, rather than dry separation. According to the characteristics of materials, weir type feeding hopper or top box feeding hopper can be selected for option.
  • GN Parallel Deck Vibrating Screen is composed of upper and lower layers in parallel. Generally, the cut point of the upper screen and lower screen are the same. The upper and lower screens are feed separately. After screening and filtration, the liquid separately flow into the collecting box. GN parallel deck vibrating screen is used for wet separation, rather than dry separation. According to the characteristics of materials, weir type feeding hopper or top box feeding hopper can be selected for option. The vibration track of GN parallel deck vibrating screen can be adjusted according to the working conditions to realize linear motion or elliptical motion. The parallel deck vibrating screen is usually made of stainless steel wire mesh screen, which is used to screen out solid with size of 38 to 2000 microns in liquid-solid mixture.

    Parallel Deck Vibrating Screen Technical Parameter

    ModelGNZS598-BLGNZS708-BL
    Vibration Mode Linear / Elliptical Motion
    Vibration Motor 2x2.5 Kw 2x2.5 KW
    Screen Qty. Upper Layer 4 pcs
    Lower Layer 4 pcs
    Upper Layer 4 pcs
    Lower Layer 4 pcs
    Screen Area 5.45 m2 6.2 m2
    Screen Opening Wire Mesh Screen 10 – 400 Mesh (38-2000 microns)
    Adjustable G Force ≤7.0G
    Deck Angle -1°--  5°
    Vibration Amplitude 4.14-5.96mm
    Weight 2560 KG 2660 KG
    Feeder Back Weir Box Feeder or Top Box Feeder for option according to feeding material condition
    Parallel Description The upper and lower decks adopt the screens with same cut point, but two decks work separately.

    Parallel Deck Vibrating Screen Workflow Diagram

    4 Parallel Deck Screen

    (Flowing diagram on upper screen)

    5 Parallel Deck Screen

    (Flowing diagram on lower screen)

    Parallel Deck Vibrating Screen Workflow Description

    Parallel design allows the feed flowing into the upper and lower screens with same cut point at the same time for separate vibration screening. After being screened by the upper screens, the filtrate falls into the buffer platter and then flows directly to the collection box at the base of the equipment. The filtrate coming from lower screen also flows to the collection box.

    Parallel Deck Vibrating Screen Features

    1. One parallel deck vibrating screen is equivalent to two single deck vibrating screens installed side by side, which saves area and reduces cost.
    2. Drawer screen replacement mode allows screens to be replaced in a quick and convenient way.
    3. Deck angle can be adjusted according to treatment requirements.
    4. High frequency fine separation vibrating screen meets the solid-liquid separation requirement of ultrafine particles.
    5. Name brand vibration motor is utilized with superior performance and reliable quality.