Oil Sludge Treatment Plant for oilfield environmental solutions company

There is one set of 15m3/hour Oil Sludge Treatment System being under final assembling and inspection in GN Company's work plant, and would be shipped to client's job site soon for Oilfield Sludge Treatment.

Besides oilfield sludge treatment, this system can also be used for treatment of refinery oil sludge, tank oil sludge, etc.The clients, whom purchase this system, would like to recollect the oil for resell/reuse, and discharge the water and solid separately.

The result achieved by GN Oil Sludge Treatment System is as follow,

Oil content in Solid, less than 2%
Oil content in Water, 500~1000ppm
Sediment & Water content in Oil, less than 3%

And, GN Company also supply Micro bubble Water Processor, it can be used to lower oil content in water to 50~100 PPM.

For the solid discharged from the system, GN Company offer solutions of Thermal Desorption Unit, and Solidification Unit based on clients' requirement.

Oil Sludge Treatment Working Procedure for this Project as below,

Part 1. Premixing Tank, to make solid content less than 20%, and make sludge can be pumped.
Part 2. Shaker Unit, to separate out coarse/big size solid (more than 2mm) from the oil sludge.
Part 3. Two Phase Centrifuge Unit, to separate fine Solid (around 20um) and Liquid.
Part 4. Three Phase Centrifuge Unit, to separate Oil, Water and little Solid left.

There is one Chemical Dosing Unit for this system, and chemical generally are Demulsifies and Flocculent.

Slant Plate Clarifier and Oil Water Separator are optional based on the project requirement. 

GN Company has 3 factories (One hour from the Beijing International Airport), with total size more than 100,000 square meters.

Welcome to visit GN Company's factories, or contact Sales Managers for technical specifications, working videos and sales reference about GN Oil Sludge Treatment System.