Centrifugal Sand Pump

GNSB Series Centrifugal Pump is designed to transfer industry slurry, waste water with solids less than 2mm. It’s widely used for drilling industry, construction mud transfer, environmental waste fluids transfer as well as mining slurry transfer industry. GNSB centrifugal sand pumps have been field proven to meet the standards for rugged and demanding applications. The pump is capable to be used for high volume, high temperature slurry and pumping high abrasive, high viscosity fluids.
  • GNSB Series Centrifugal Pump is designed to transfer industry slurry, waste water with solids less than 2mm. It’s widely used for drilling industry, construction mud transfer, environmental waste fluids transfer as well as mining slurry transfer industry. GNSB centrifugal sand pumps have been field proven to meet the standards for rugged and demanding applications. The pump is capable to be used for high volume, high temperature slurry and pumping high abrasive, high viscosity fluids.

    GN Centrifugal Sand Pump Specifications

    All spare parts interchangeable with NOV Mission Pump

    ModelFlow(m3/h)Lift(m)Power(Kw)Motor Speed(RPM)Impeller(Inch)
    GNSB8×6C-14J 320m3/h 35m 75kW 1450RPM(50Hz) 14in
    GNSB8×6C-12J 1750RPM(60Hz) 12in
    GNSB8×6C-13J 272m3/h 35m 55kW 1450RPM(50Hz) 13in
    GNSB8×6C-11J 1750RPM(60Hz) 11in
    GNSB6×5C-13J 200m3/h 35m 45kW 1450RPM(50Hz) 13in
    GNSB6×5C-10J 1750RPM(60Hz) 10in
    GNSB6×5C-12J 150m3/h 30m 37kW 1450RPM(50Hz) 12in
    GNSB6×5C-9.5J 1750RPM(60Hz) 9.5in
    GNSB5×4C-13J 120m3/h 35m 30kW 1450RPM(50Hz) 13in
    GNSB5×4C-11J 1750RPM(60Hz) 11in
    GNSB5×4C-12J 90m3/h 30m 22kW 1450RPM(50Hz) 12in
    GNSB5×4C-10J 1750RPM(60Hz) 10in
    GNSB4×3C-13J 65m3/h 35m 18.5kW 1450RPM(50Hz) 13in
    GNSB4×3C-12J 1750RPM(60Hz) 12in
    GNSB4×3C-12J 55m3/h 28m 15kW 1450RPM(50Hz) 12in
    GNSB4×3C-10J 1750RPM(60Hz) 10in
    GNSB4×3C-11J 45m3/h 25m 11kW 1450RPM(50Hz) 11in
    GNSB4×3C-9.5J 1750RPM(60Hz) 9.5in
    GNSB3×2C-10J 35m3/h 35m 7.5kW 1450RPM(50Hz) 10in
    GNSB3×2C-9J 1750RPM(60Hz) 9in

    GN Centrifugal Sand Pump Advantage

    1. Standard spare parts for easy maintenance.
    2. Abrasion resistant pump casing and impeller made from hard ductile iron alloy
    3. Improved bearing life by using wide open-vane impeller creates lower axial thrust
    4. Minimizes turbulence and abrasive wear by using concentric design
    5. Anti-loosening impeller lock bolt to eliminate pump damage in case of wrong direction running.
    6. Tungsten carbide mechanical seal to provide zero leakage and longer operation life.
    7. Shaft sleeve is replaceable to prevent complete shaft wear.
    8. All bearings from top brand for reliable operation like NSK,FAG, or SKF.
    9. Fully casting pump skid instead of welding to provide stable supporting for the pump and motor, in a result to improve the operation life of the coupling and all bearings.

    GN Separation and Conveying Equipment company manufacture separation equipment and conveying equipment as well as the transfer pumps for the industry process application. This allows GN to be able to provide full package solution to our clients for different applications. Both GNSB transfer centrifugal sand pump and separation equipment are widely used for following industry.

    • Environmental Slurry Treatment.
    • Wastewater Treatment.
    • Mining & and Construction Mud treatment.
    • Chemical and Pharmaceutical industry.
    • Oil and Gas industry.
    • Food and Beverage Industry.